WYQ24-16 curving machine

11. The main purpose and scope of application Test for the symmetry of the machine profile bending machine is dedicated to prof

 1. The main purpose and scope of applicationTest for the symmetry of the machine profile bending machine is dedicated to profiles of a common bending equipment. It can be rolled round workpieces, such as spiral-shaped, wider use of the boiler, chemical, mining, construction, machinery and shipbuilding industries.2. Main technical parametersDie diameter --- 235mmPlate yield limit --- 245MPADrive motor --- YXJ100L1-4Hydraulic motor power --- 2.2KW-6Model reducer --- BWD.2-71-1.5Packing size --- L*W*H: 665 * 550 * 1350 mm3. The main structure and working principle3-1. The machine for w24y-16-type bending machine, the mold for the transmission, through the hydraulic cylinder for vertical movement, under the mold through the gear reducer crack cooperation with the circular motion, compact structure, convenient operation and maintenance.3-2. The machine is overall in the welding work on the part of the chassis and transmission parts of the two major components. Work in part by a stent, three die as well as some auxiliary component parts, by adjusting the height of the mold to achieve the bending function profiles. Drive by motor reducer and other auxiliary component parts.3-3. Under the die by the electric drive is achieved through the reducer through the reducer output shaft of the gear and die on one end of the transmission gears to the next mold, and thus driven by the rotating mold.3-4. Movement on the die to achieve take-off and landing is the hydraulic cylinder piston rod hydraulic oil to achieve the movement led take-off and landing on the mold3-5. Discharge volume parts when the system is completed, and then increased to enhance the mold between the mold removed from the upper and lower volume parts.

4. Machine lubricationPart of the friction machine lubricants required in order to maintain the normal operation of the machine to extend the service life. Lubricants into the box in the slowdown, the general grade for the HJ-40 machine oil. In gear grease must be applied regularly.5. Electrical Part1. The electrical parameters50Hz 380V supply voltageMotor YXJ 2.2KWReducer BWD.2-71-2.2 2.2KW2. The installation of wiringThen in accordance with the requirements of all electric lines and control lines, and to ensure reliable electrical grounding earthing and insulation resistance measurement in the framework of well-confirmed case of no-load and load allowed to carry out the test.

6. Machinery installation and commissioningThe level of the ground plane and tilt in any direction shall not exceed 2mm / m.Machines should be checked before installation is complete, all preparations have been installed before they can proceed on the installation sequence.The following mold surface level as a benchmark to check the tilt and the upper and lower mold parallelism, adjusted to meet the requirement. All installed, inspected before tightening bolts.Must ensure that equipment after the installation of flexible movement.Prior to starting the test the connection to be solid and the Department of Inspection and adjustment of the gap part of all sports and travel and so on, to check whether or not a good electrical switch.After the completion of preparatory work for the commissioning, commissioning of 10 minutes, stopping to check all in good condition after the operation before the load test.

7. Machine operation and safety maintenanceThe equipment is simple and convenient, safe and reliable. Pressed, respectively, "is to", "reverse" button, you can get a different shift. To operate the machines should follow the following principles:1. Are not allowed in the machine when the normal electrical system does not work.2. The prohibition of non-compliance with the rules or do not understand those who operate the machines.3. The work area should have good lighting.4. The work of bending angle iron plates are not allowed to overlap at both ends to prevent damage to the machine.In order to ensure good use of machinery, spare parts must be promptly replaced after wear and tear, the establishment of reasonable repair and maintenance of the system, the workplace, the equipment should be kept clean and tidy surroundings.

WYQ24-16 curving machine